So, I was at active surplus (with trusted, albeit slightly
slow, sidekick Darryl) looking for parts for the fusor or
the 3D display when I ran into this amazing old school
oscilloscope. After quickly brainstorming some reason I
could justify buying this beautiful piece of science
equipment (or history depending on your view) I got it! The
justification is actually quite good: instead of buying a
Geiger counter, we can use activated aluminum and a charged
plate (neutron hits the aluminum, shoots of an electron
which gets captured by the plate which turns into a signal
that the oscilloscope can see) to verify fusion is
happening.
Anyways, here's a little video of the piece in action: hooked up to my speakers playing Roads by Portishead. Sorry about the video quality... also the cameras refresh rate doesn't do justice to the display.
Anyways, here's a little video of the piece in action: hooked up to my speakers playing Roads by Portishead. Sorry about the video quality... also the cameras refresh rate doesn't do justice to the display.
As for the fusor route, we are going to get florescent
transformers (~20,000V at a couple miliamps) for power, and
hopefully e-bay will have the correct vacuum pump (it's
hard to find ones that go down to 5microns). As for the
vacuum container... we might just have to get one custom
made. This is one piece that I don't really want to try
building myself since it's the only part of the project
that could seriously maim us.
Oh, and stay tuned... tomorrow I'm going to post a video I did a while ago about getting a cool explosion using ferrocium which you can get out of a common lighter!
Oh, and stay tuned... tomorrow I'm going to post a video I did a while ago about getting a cool explosion using ferrocium which you can get out of a common lighter!